传    真:0755-82597252  
邮    编:518109   
邮    箱:info@kingfeal.com   
地    址:深圳市龙华区大浪华霆路


当前位置: 首页 > 产品展示  > 弹簧螺丝、松不脱螺丝



Large Knob, Spring-Loaded - Types PF11, PF11M, PF11MF, PF11MW, PF12, PF12M, PF12MF, PF12MW, PEM C.A.P.S

large_knob_spring_loadedPEM® type PF11 / PF12 family of panel fasteners provides design flexibility by offering three styles of installation types, each having the same profile or look above the sheet or panel into which it is installed. The various mounting types include self-clinching, flare-mounted, and floating styles. The standard selection of knobs include knurled or smooth metal caps and plastic PEM C.A.P.S™.

Low Profile Knob, Spring-Loaded - Types PF30, PF31, PF32, PF50, PF60

low_profile_knobThe low-profile design satisfies many functional and cosmetic requirements. Types PF30, PF31, and PF32 have a convenient, large slotted head for tool or finger operation. As well as type PF50, with a convenient large head and a Phillips recess for tool or finger operation.    


Screw Head, Spring-Loaded - Types PFC2, PFS2

screw_head_spring_loadedTypes PFC2 and PFS2 meet "operator access area" requirements similar to UL 508. Available in both steel or stainless steel for tool or finger operation. Most sizes are available in three screw lengths.


Screw Head, No Spring - Type PFHV

screw_head_no_springType PFHV is a low cost, small, compact and low profile design for limited access areas. Universal slot / Phillips recess standard with two screw lengths available.


Tool Only, Spring-Loaded - Types PFC2P, PFC4

tool_only_non_flush_spring_loaded Type PFC2P has a fully concealed-head for tool only access. It is UL approved and available in assorted screw lengths. Type PFC4 installs into stainless steel sheets HRB 88 or less. Also has a fully concealed-head for tool only access. UL approved and available in assorted screw lengths.


Tool Only, Flush Mounted, No Spring - Types N10, PR10, PS10
tool_only_flush_mounted_no_springThe screw head for type PS10 is flush in sheets as thin as .125" / 3.2mm and remains captive in retainer when disengaged. Type PR10 retainer is for use in sheets of HRB 70 or less and type N10 nuts are for use in sheets of HRB 80 or less.


Tool Only, Spinning Clinch Bolt, No Spring - Types SCB, SCBJ

tool_only_spinning_clinch_boltTypes SCB and SCBJ spinning clinch bolts permanently captivate into sheets as thin as .040" / 1.02 mm and greater. A low cost solution to replace loose hardware, available with jacking or axial flaot features. Appropriate for close centerline-to-edge applications.


Tool Only, Spinning Clinch Bolt, With Spring - Types SCBR™

SCBRType SCBR spinning clinch bolt installs by simply pressing it into a properly sized hole. The controlled clinching action permanently captivates the screw and spring in the panel and allows the screw to spin freely in the sheet.


Install Into Stainless - Type PFC4

captive_hardware_stainlessType PFC4 installs into stainless steel sheets HRB 88 or less. Also has a fully concealed-head for tool only access. UL approved and available in assorted screw lengths.

Locating Pin, Spring-Loaded - Types PSL2, PTL2

locating_pinTypes PSL2 and PTL2 are for use in sheets of HRB 80 or less. Quick lockout feature holds plunger in retracted position and reverse side of sheet is flush when plunger is retracted.


深圳市金福翔五金制品有限公司© 2010   电话:0755-82595119  传真:0755- 82597252  
邮箱:info@kingfeal.com  粤ICP备11036736号  技术支持:蒸蒸科技
<listing id="nxv37"></listing><cite id="nxv37"><video id="nxv37"><menuitem id="nxv37"></menuitem></video></cite>
<cite id="nxv37"></cite>
<var id="nxv37"></var><cite id="nxv37"><video id="nxv37"></video></cite>
<var id="nxv37"></var>
<var id="nxv37"><video id="nxv37"><thead id="nxv37"></thead></video></var>
<cite id="nxv37"><video id="nxv37"></video></cite>
<var id="nxv37"><dl id="nxv37"><thead id="nxv37"></thead></dl></var><var id="nxv37"></var>
<var id="nxv37"></var>
<cite id="nxv37"><span id="nxv37"><menuitem id="nxv37"></menuitem></span></cite>
<var id="nxv37"><dl id="nxv37"><thead id="nxv37"></thead></dl></var>
<var id="nxv37"></var>